WZA10 / WZA11 / WZA20
with hinged cover
The water-protected safety switch with separate actuator and hinged cover WZA… is a safety switch with forced actuation and is used to control the close position of lift doors and protective enclosures. With the infinitely variable revolving drive head it can be actuated from any direction and allows small swiveling radii. The actuator is mounted at the door leaf. When pulling the actuator out of the switch a forced opening of the contact is made.
Features
- version with hinged lid
- infinitely adjustable revolving drive head
- optional lateral or frontal actuation
- actuator will not be ejected
- positively driven normally closed contact
- large tolerance between contact making to the stop of the actuator
- mounting brackets made of stainless steel, rotatable for change of the hole distance
- three possible cable entries freely selectable
Order information codes
Technical data
norms | EN 81-20, EN 81-50, IEC/EN 60947-5-1, GS-ET 15, EN ISO 13489-1 |
switching capacity | Ui = 250 V Ith = 10 A Uimp = 4 kV AC-15: Ue = 230 V Ie = 6 A DC-13: Ue = 200 V Ie = 0.5 A AC-15: Ue = 24 V Ie = 10 A |
short-circuit capacity | T10 A F 16 A |
contact material | fine silver |
actuation- / back pressure force | 9 N / 0 N |
connection | by screw terminal max. 2.5 mm², three cable entries M20x1.5 |
level of protection | IP67 |
ambient air temperature | -30 °C up to +80 °C |
installation position | any |
B10d – value (10 % nominal load) | 2 million / service life max. 20 years |
weight | WZA = 87 g BBA = 10 g BBA-S = 10 g BBA-SL = 11 g BBA-U = 11 g BBA-KIPP = 30 g |