DL(F)1-WV

Standard device (IP54) for vertical installation

For vertical installation we offer the door interlock DL(F)1 also in level of protection IP54 as special version DL(F)1-WV. To ensure the water protection, the DL(F)1W is equipped with a sealed metal cover and a hard chrome-plated latch bolt for better corrosion protection.

DLF1-WV-L-X15-CHR(u).10S

321_tv_schutzart_dlf1-wv-x15u-10_isometrisch-7

DLF1-WV-L-X15-CHR(u).10S

322_tv_schutzart_dlf1-wv-x15u-10_frontal-7

Dimensions DLF1-WV-R-X20-CHR(u).10S

DLF1-WV-L-X15-CHR(u).10S

Dimensions DLF1-WV-R-X20-CHR(u).10S

Features:

general:

metal housing with high stability
silent due to buffers in both directions
maintenance-free by permanent lubrication with high quality lubricants (up to -30 °C)
oiled felt ring at latch bolt for lubrication as well as for sealing against dirt and dust (at X-dimension ≥ 10 mm)
constrained faulty closure at DLF1-WV for use in passenger lifts
contacts with solid fine silver plating for a reliable function even at low voltages and currents
auxiliary switch as normally closed contact and/or normally open contact
with two galvanically isolated
contacts possible
extensive range of accessories

special features:

waterprotection (IP54) at vertical installation position in the door frame (-WV)
metal cover with rubber seal instead of transparent cover
chromed latch bolt for better oxidation protection
terminal block with all electrical connections
connection for bowden cable or cable pull for actuation or unlocking available, e.g.
application 1:unlocking from the pit ladder (< 1.80 m according to EN 81-20)
application 2:offset emergency release triangle (< 2 m according to EN 81-20)
application 3:actuation by bowden cable as alternative to pull rod

Order information codes:

Technical data:

norms	EN 81-20, EN 81-50, EN 81-21, EN 60947-5-1
certificates	type approval certificate: EU-DL 013 (DLF1-WV) and EU-DL 015 (DL1-WV)
switching capacity: switch for locking mechanism monitoring switch auxiliary switch .9/… auxiliary switch .90/01	Ui = 250 V Ith = 10 A Uimp = 4 kV AC-15: Ue = 230 V Ie = 2 A DC-13: Ue = 200 V Ie = 2 A AC-15: Ue = 230 V Ie = 2 A DC-13: Ue = 200 V Ie = 0.5 A AC-15: Ue = 230 V Ie = 2 A DC-13: Ue = 200 V le = 0.5 A AC: Ue = 250 V Ie = 6 A EN 61058 DC: Ue = 200 V Ie = 0.25 (0.1) A DC: Ue = 60 V Ie = 1.0 (0.5) A DC: Ue = 24 V Ie = 3.0 (2.0) A
short-circuit capacity	T 10 A F 16 A
contact material	fine silver
actuation: actuation torque (typical) actuation force (typical) max. force in non-operating state	1.7 Nm at the roller lever 45 N at the pull rod 20 N at the roller lever (at 35 mm stroke) 5 N at the pull rod
connection	by screw terminal max. 2.5 mm² cable entry M25 with reducing ring and cable gland M20x1.5
level of protection	IP54, vertical customary position and cable gland above
ambient air temperature	-10 °C up to +65 °C (no freezing, special version up to -30 °C)
weight	850 g to 1100 g (according to version)