DL(F)2MO-W

with motorized actuation for double-leaf doors

The motorized door interlock DL(F)1MO is also available in level of protection IP54.
Due to the sealing against splashing water and dust this door interlock is ideally suitable for the use in harsh industrial environments.
Door interlocks of DL(F)2MO-W type are installed in the door post above the door.

DLF2MO-W-L-X15-CHR(u).1.P

361_tv_schutzart_dlf2mo-w-x15u_isometrisch-1

DLF2MO-W-L-X15-CHR(u).1.P

362_tv_schutzart_dlf2mo-w-x15u-10_frontal

Dimensions DLF2MO-W-R-X20-CHR(u).1.P

Features:

general:

metal housing with high stability
silent due to buffers in both directions
maintenance-free by permanent lubrication with high quality lubricants (up to -30 °C)
oiled felt rings at the latch bolts for lubrication as well as for sealing against dust and dirt (at X-dimension ≥ 10 mm)
constrained faulty closure at DLF2MO-W for use in passenger lifts
contacts with solid fine silver plating for a safe and reliable function, also at low voltages and currents
auxiliary switch with one contact

special features:

integrated actuation by maintenance-free, low-noise three-phase motor and decelerated dropping of the bolts
patent protected by Gbm DE 20 2015 105 331 and by patent EP 3 153 454 B1, validated in DE / FR / IT / ES
water protection (IP54) at horizontal installation (-W)
metal cover with rubber seal instead of transparent cover
chromed latch bolts for better oxidation protection, as alternative latch bolts made of stainless steel
high starting power
low pull-in current (< 1 A at 24 V)
automatic switching over to reduced holding current (< 0.2 A), energy-saving
safe unlocking by position monitoring even if the bolts are temporarily blocked (incorrect operation)
terminal block with all electrical connections
liberation from the shaft by cover side triangle or optional pull lever for manual operation
connection for bowden cable or cable pull for unlocking available, e.g.
application 1: unlocking from the pit ladder (< 1.80 m according to EN 81-20)
application 2: offset emergency release triangle (< 2 m according to EN 81-20)

Order information codes:

Technical data:

norms	EN 81-20, EN 81-50, EN 60947-5-1
certificates	type approval certificate: EU-DL 808-2 (DLF2MO-W) and EU-DL 807-2 (DL2MO-W) UK-DL 808-2 (DLF2MO-W) and UK-DL 807-2 (DL2MO-W)
switching capacity: switch for locking mechanism auxiliary switch .90/01	Ui = 250 V Ith = 10 A Uimp = 4 kV AC-15: Ue = 230 V Ie = 2 A DC-13: Ue = 200 V Ie = 2 A AC: Ue = 250 V Ie = 6 A EN 61058 DC: Ue = 200 V Ie = 0.25 (0.1) A DC: Ue = 60 V Ie = 1.0 (0.5) A DC: Ue = 24 V Ie = 3.0 (2.0) A
short-circuit capacity	T 10 A F 16 A
contact material	fine silver
motor drive of the latch bolt: operating voltage pull-in current / time (typical) holding current	24 V DC (-15 % / +25 %) regulated 0.8 A / < 0.5 s 0.15 A
connection	by screw terminal max. 2.5 mm² cable entry M25 with reducing ring and cable gland M20x1.5
level of protection	IP54
ambient air temperature	-10 °C up to +45 °C (special version up to -30 °C)
weight	1800 g to 2050 g (according to version)