DL(F)1MO-W

Universal device (IP54) with motorized actuation

The motorized door interlock DL(F)1MO is also available in level of protection IP54. Due to the sealing against splashing water and dust this door interlock is ideally suitable for the use in harsh industrial environments. We offer the DL(F)1MO in level of protection IP54 for the horizontal and vertical installation position.

341_tv_schutzart_dlf1mo-w-x15u_isometrisch

Features:

general:

metal housing with high stability
silent due to buffers in both directions
maintenance-free by permanent lubrication with high quality lubricants (up to -30 °C)
oiled felt ring at latch bolt for lubrication as well as for sealing against dirt and dust (at X-dimension ≥ 10 mm)
constrained faulty closure at DLF1MO-W(V) for use in passenger lifts
contacts with solid fine silver plating for a safe and reliable function, even at low voltages and currents
as option: auxiliary switch with one contact

special features:

integrated actuation by maintenance-free, low-noise three-phase motor and decelerated dropping of the bolt
patent protected by Gbm DE 20 2015 105 331 and by patent EP 3 153 454 B1, validated in DE / FR / IT / ES
water protection (IP54) at horizontal installation (-W) resp. at vertical installation position (-WV)
metal cover with rubber seal instead of clear cover
chromed latch bolt for better oxidation protection
high starting power
low pull-in current (< 1 A at 24 V)
automatic switching over to reduced holding current (< 0.2 A), energy-saving
safe unlocking by position monitoring even if the bolt is temporarily blocked (incorrect operation)
terminal block with all electrical connections
liberation from the shaft by cover side triangle or optional pull lever for manual operation
connection for bowden cable or cable pull for unlocking available, e.g.
application 1:unlocking from the pit ladder (< 1.80 m according to EN 81-20)
application 2:offset emergency release triangle (< 2 m according to EN 81-20)

Order information codes:

Technical data:

norms	EN 81-20, EN 81-50, EN 60947-5-1
certificates	type approval certificate: EU-DL 808-2 (DLF1MO-W, DLF1MO-WV) und EU-DL 807-2 (DL1MO-W, DL1MO-WV) UK-DL 808-2 (DLF1MO-W, DLF1MO-WV) und UK-DL 807-2 (DL1MO-W, DL1MO-WV)
switching capacity: switch for locking mechanism auxiliary switch .90/01	Ui = 250 V Ith = 10 A Uimp = 4 kV AC-15: Ue = 230 V Ie = 2 A DC-13: Ue = 200 V Ie = 2 A AC: Ue = 250 V Ie = 6 A EN 61058 DC: Ue = 200 V Ie = 0.25 (0.1) A DC: Ue = 24 V Ie = 3.0 (2.0) A
short-circuit capacity	T 10 A F 16 A
contact material	fine silver
motor drive of the latch bolt: operating voltage pull-in current / time (typical) holding current	24 V DC (-10 % / +25 %) regulated 0.8 A / < 0.5 s 0.15 A
connection	by screw terminal max. 2.5 mm² cable entry M25 with reducing ring and cable gland M20x1.5
level of protection	IP54
ambient air temperature	-10 °C up to +45 °C (special version up to -30 °C)
weight	1000 g to 1200 g (according to version)